dummy-link

Log4jl

Log4jl is a comprehensive and flexible logging library for Julia programs.

Readme

Log4jl - a versatile logging framework for Julia

Build StatusCoverage Status

Log4jl is a comprehensive and flexible logging framework for Julia programs.

Usage

To create logger call @Log4jl.logger macro after importing Log4jl module. This macro call initializes and configures the logging framework. Also it creates logger object which cab be used by any of logging functions or macros to perform logging operations.

using Log4jl

const logger = @Log4jl.logger

error(logger, "Error in my code")

# or

@Log4jl logger = @Log4jl.logger

@error "Error in my code"

See usage in example/simple.jl.

Logger

In order to create logger instance, call macro @Log4jl.logger [<name>] [MSG=<message_type>] [URI=<config_location>] [begin <config_code_block> end]. It accepts following parameters:

  1. name: a string which specifies a logger name from a configuration
  2. MSG=<message_type>: a message type used for configuring a logger
  3. URI=<config_location>: a configuration location
  4. begin <configuration> end: a configuration program block (must return Configuration object)

If the root logger is required use macro Log4jl.rootlogger with the same parameters as for Log4jl.logger with one exception: root logger does not have a name.

# get the root logger
const logger = @Log4jl.rootlogger

# get the configured logger by name (uses FQMN by default)
const logger = @Log4jl.logger

# get the configured logger by name explicitly
const logger = @Log4jl.logger "TestLogger"

# get the configured logger by name that will use parameterized messages
const logger = @Log4jl.logger "TestLogger" MSG=ParameterizedMessage

# get the configured logger by from file specified in the parameter
const logger = @Log4jl.logger URI="myconfig.xml"

# get the configured logger from a programmatic configuration
const logger = @Log4jl.logger begin
    Configuration("Custom",
        PROPERTIES(),
        APPENDERS(),
        LOGCONFIGS()
    )
end

Configuration

The default configuration file is log4jl.*. An extension of the configuration file determines format in which configuration is described.

Configuration file should be located in:

  • For stand-alone module: a directory where a source code file of the module is located.
  • For package: a package root directory.

Log4jl Internal Properties

Log4jl can be configured with properties which can be set through environmental variables.

Property Description Default Value
LOG4JL_LINE_SEPARATOR Default new line separator sequence [(0x0d - win) 0x0a]
LOG4JL_DEFAULT_STATUS_LEVEL Default logger status level to use if not specified in configuration. ERROR
LOG4JL_INTERNAL_STATUS_LEVEL Default status level of internal Log4jl logging to use if not specified in configuration. WARN
LOG4JL_LOG_EVENT Type of the default logger event generator which converts messages into logging events. Log4jlEvent
LOG4JL_CONTEXT_SELECTOR Type of the default logger context selector. ModuleContextSelector

Logging Separation

There are many well known use cases where applications may share an environment with other applications and each has a need to have its own, separate logging environment.

There are a few ways to archive logging separation using different ContextSelector implementations:

  • SingleContextSelector: This selector creates a single LoggerContext using a single configuration that will be shared across all applications.

  • ModuleContextSelector: This selector creates a one LoggerContext per module. This allows each module be configured to share the same configuration or can be individually configured. However, if configuration is not provided or has error then the parent module context is used for the current module. If there exist no parent module then new context is created with default configuration.

Context selection can be done by setting environment variable LOG4JL_CONTEXT_SELECTOR with a name of context selector type.

Custom Log Levels

Log4jl supports custom log levels. Custom log levels can be defined in code or in configuration. To define a custom log level in code, use the Level.add function. This function creates a new level for the specified name and generates appropriate convenience functions. After a log level is defined you can log messages at this level by calling corresponding log function:

# This creates the "VERBOSE" level if it does not exist yet.
Log4jl.Level.add(:VERBOSE, 550)

# Create a logger
const logger = @logger

# Use the custom VERBOSE level
Log4jl.verbose(logger, "a verbose message")

When defining a custom log level, the intLevel parameter (550 in the example above) determines where the custom level exists in relation to the standard levels built-in to Log4jl. For reference, the table below shows the intLevel of the built-in log levels.

Standard log levels built-in to Log4jl

Standard Level intLevel
OFF 0
FATAL 100
ERROR 200
WARN 300
INFO 400
DEBUG 500
TRACE 600
ALL typemax(Int16)

Defining Custom Log Levels in Configuration

Custom log levels can also be defined in configuration. This is convenient for using a custom level in a logger filter or an appender filter. Similar to defining log levels in code, a custom level must be defined first, before it can be used. If a logger or appender is configured with an undefined level, that logger or appender will be invalid and will not process any log events.

The customlevels section of configuration element defines a custom levels. Internally it calls the same Level.add function discussed above.

Parameter Name Type Description
name string The name of the custom level. The convention is to use all upper-case names.
intLevel integer Determines where the custom level exists in relation to the standard levels built-in to Log4jl (see the table above).

The following example shows a configuration that defines some custom log levels and uses a custom log level to filter log events sent to the console.

configuration:
  status: trace
  name: YAMLTest
  customlevels:
    diag: 350
    verbose: 150

  appenders:
    ColorConsole:
      name: STDOUT

  loggers:
    logger:
      -
        name: X.Y
        level: diag
        appenderref:
          -
            ref: STDOUT

Filters

Filters allow logged Events to be evaluated to determine if or how they should be published. A Filter will be called on one of its filter methods and will return a FilterResult, which is an Enum that has one of 3 values:

  • ACCEPT: no filters called, accept event
  • DENY: ignore event, return to caller
  • NEUTRAL: pass event to other filters

Filters may be configured in one of four locations:

  • Context-wide Filters are configured directly in the configuration. Events that are rejected by these filters will not be passed to loggers for further processing. Once an event has been accepted by a context-wide filter it will not be evaluated by any other context-wide filters nor will the Logger's Level be used to filter the event. The event will be evaluated by logger and appender filters however.
  • Logger Filters are configured on a specified Logger. These are evaluated after the context-wide filters and the log Level for the Logger. Events that are rejected by these filters will be discarded and the event will not be passed to a parent Logger regardless of the additivity setting.
  • Appender Reference Filters are used to determine if a Logger should route the event to an appender.
  • Appender Filters are used to determine if a specific Appender should handle the formatting and publication of the event.

Dev Notes

Architecture

Log4jl has similar architecture as Apache Log4j 2 framework.

  • Loggers are wrappers around configuration
  • Loggers would change behavior if configuration is changed
  • Logger hierarchy based on hierarchy of configurations
  • Global logger context keeps track of all loggers
  • Root logger has no name and additivity, its default level is ERROR
  • Logging functions support:
    • plaint text
    • markers
    • objects

Constants

  • LOG4JL_CONFIG_DEFAULT_PREFIX: prefix of the configuration file. Default value is 'log4jl'.
  • LOG4JL_CONFIG_EXTS: Map of configuration file extensions.
  • LOG4JL_CONFIG_TYPES: Map of configuration types.

Implementation details

  • 'isenabled' checks if logger allowed to process event at specified level

Missing

  • On-fly reconfiguration
  • Multi-threading/processing support
  • Lookups
  • Configuration formats: JSON, XML, TOML
  • Handle configuration recursion

Message

  • For custom formated messages, create two functions with the same name and following signatures:
    • (msg::AbstractString, params...) => Message
    • (msg::Any) => Message

Loading sequence

  1. Module Log4jl is referenced
  2. Function Log4jl.__init__ is called
    1. A logger context selector is initialized as object and assigned to global constant LOG4JL_CONTEXT_SELECTOR from an environment variable with the same name. Default context selector type is Log4jl.ModuleContextSelector.
    2. Default status level is initialized as LOG4JL_DEFAULT_STATUS_LEVEL global constant from an environment variable with the same name. Default status level is Log4jl.Level.ERROR.
    3. A logger event type is is initialized as LOG4JL_LOG_EVENT global constant from an environment variable with the same name. Default logger event type is Log4jl.Log4jlEvent.
  3. Macro Log4jl.logger is called with(out) parameters
    1. Parameters parsed
    2. Context selector is used to create a logging context
    3. Configuration is created a. Programmatic configuration is evaluated b. Configuration file is located, loaded and parsed
    4. Logging context is initialized with the created configuration
    5. Logging context is started
      1. Shutdown hook is created.
    6. Configuration is started
      1. Configuration is setup (properties and appenders are created)
      2. Configuration is configured (loggers are created and referenced to appenders)
      3. All appenders are started
    7. Logging context used to create a logger wrapper
    8. Logger object is returned
  4. Logger object is used in logging functions.

Shutdown sequence

TODO: proper shutdown when workspace is called.

First Commit

05/03/2015

Last Touched

about 2 months ago

Commits

56 commits

Requires:

Used By: